WARNING! Full build is broken, alembic has not been merged in correctly and has some references to particle stuff.
Don't have time to tackle this now (and probably would be better if someone knowing what he's doing does it anyway).
Conflicts:
release/scripts/startup/bl_ui/properties_particle.py
source/blender/blenkernel/intern/library_remap.c
source/blender/blenkernel/intern/smoke.c
source/blender/editors/physics/particle_object.c
source/blender/editors/physics/physics_intern.h
source/blender/editors/physics/physics_ops.c
source/blender/editors/space_outliner/outliner_intern.h
source/blender/editors/space_view3d/drawvolume.c
source/blender/makesrna/intern/rna_smoke.c
This basically exposes to the UI a function that was only available
through a debug macro ; the purpose is obviously to help debugging
simulations. It adds ways to draw the vectors either as colored needles
or as arrows showing the direction of the vectors. The colors are based
on the magnitude of the underlying vectors.
Reviewers: plasmasolutions, gottfried
Differential Revision: https://developer.blender.org/D1733
Current approach uses view aligned slicing to generate polygons for GL
texturing such that the generated polygons are always facing the view
plane. Now it is also possible to use object aligned slicing, which
creates polygons by slicing the object perpendicular to whichever axis
is facing the most the view plane. It is also possible to create a
single slice for inspecting the volume, or for 2D rendering effects.
Settings for this, along with a density multiplier setting, are to be
found in a newly added "Smoke Display Settings" panel in the smoke
domain properties tab.
Reviewers: plasmasolutions, gottfried
Differential Revision: https://developer.blender.org/D1733
In addition to pack of conflicts listed below, also had to comment out particle part of new Alembic code... :/
Conflicts:
intern/ghost/intern/GHOST_WindowWin32.cpp
source/blender/blenkernel/BKE_effect.h
source/blender/blenkernel/BKE_pointcache.h
source/blender/blenkernel/intern/cloth.c
source/blender/blenkernel/intern/depsgraph.c
source/blender/blenkernel/intern/dynamicpaint.c
source/blender/blenkernel/intern/effect.c
source/blender/blenkernel/intern/particle_system.c
source/blender/blenkernel/intern/pointcache.c
source/blender/blenkernel/intern/rigidbody.c
source/blender/blenkernel/intern/smoke.c
source/blender/blenkernel/intern/softbody.c
source/blender/depsgraph/intern/builder/deg_builder_relations.cc
source/blender/gpu/intern/gpu_debug.c
source/blender/makesdna/DNA_object_types.h
source/blender/makesrna/intern/rna_particle.c
Point cache read code contains checks designed to prevent it reading
stale data when the relevant simulation code should instead compute
the next frame from the previous one. However in some situations like
motion blur subframes the simulation can't possibly do it and just
exits. This causes completely incorrect motion blur at or after the
last cached frame.
To fix, add a parameter that tells the cache code whether it should
apply the checks and exit, or read what it can even if stale (true
means exactly same as old behavior).
Doing this in cache rather than clamping the frame number better in
the caller lets it handle the case of incomplete cache that stops
before the official last frame.
Reviewed By: mont29, lukastoenne
Maniphest Tasks: T49004
Differential Revision: https://developer.blender.org/D2144
When the colliders are joined, each cell that touches them only gets
velocity contribution once. When there are multiple objects, velocities
are summed, which causes some cells to get 2x, 3x or more than the actual
object velocity.
Fix this by using the average velocity of all colliders touching a cell.
Reviewers: miikah, lukastoenne
Reviewed By: lukastoenne
Subscribers: dafassi, scorpion81, #physics
Maniphest Tasks: T43782
Differential Revision: https://developer.blender.org/D2112
Issue was that the domain matrix was not initialized properly on the
first frame (in smokeModifier_init), which caused OpenVDB to throw an
exception for trying to create a VDB grid with non-affine transform.
simulations.
This commits implements OpenVDB as an extra cache format in the Point
Cache system for smoke simulations. Compilation with the library is
turned off by default for now, and shall be enabled when the library is
present.
A documentation of its doings is available here: http://
wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport.
A guide to compile OpenVDB can be found here (Linux): http://
wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/
Dependencies_From_Source#OpenVDB
Reviewers: sergey, lukastoenne, brecht, campbellbarton
Reviewed By: brecht, campbellbarton
Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli,
jtheninja, lukasstockner97, dingto, brecht
Differential Revision: https://developer.blender.org/D1721
Issue was with very thin domains along one or two axes, these could lead to simulation
with only one cell width - and smoke code assumes we have at least 4 cells in each direction.
So now, we clamp resolution to a minimum of 4 in smoke_set_domain_from_derivedmesh().
Note: in extreme cases like this report, this will generate very un-cubic cells,
check it still works OK in 3DView is needed here.
Thanks to @genscher and @kevindietrich for help on this issue. :)
Active color wasn't copied over if it differs from what the user plugged
in in the UI. Also use a darker color for the default color so smoke
doesn't doen't appear too bright.
Reported in IRC by mib2berlin.
This change is for a few reasons:
- it works with color, and (therefore) will need to be color managed, at
some point. This will be much easier to do if the code is closer to the
actual color management code (in Blender's core, so to speak).
- it has nothing to do with the actual fire simulation, as it is just
used to create a lookup table
- it can be reused for other purposes (i.e. in Blender internal
renderer, if people are interrested in a blackbody node à la Cycles)
- cleanup: some functions (`contrain_rgb`, `xyz_to_rgb`) already exist
in BLI
Reviewers: brecht
Reviewed By: brecht
Subscribers: brecht
Differential Revision: https://developer.blender.org/D1719
As in the title. In the smoke version, there was also an extra
'for_render' parameter that wasn't used, and wasn't used by the callers
either, so it was removed altogether.
Reviewers: brecht
Reviewed By: brecht
Subscribers: brecht
Differential Revision: https://developer.blender.org/D1718
Also added a DEBUG_TIME macro in the related files to comment time funcs out.
Reviewers: brecht
Reviewed By: brecht
Subscribers: brecht
Differential Revision: https://developer.blender.org/D1717
Gives a global speedup of about 5% in smoke simulation (as usual, parallelized chunks themselves
are about 15-25% quicker with BLI_task than with OMP), using a simple setup with two generators
(one from mesh, one from particles), an obstacle and a windfield.
This is more like a workaround to prevent obvious cases fail, but in theory
if some other area will start updating object for subframes blender will
crash again.
Perhaps proper way to solve this will be to copy objects for subframe updates.
The smoke obstacle detection was using a maximum distance for BVH
checks to find mesh elements that define boundary cells in the grid.
This BVH test was using an arbitrary value of 0.6 cell units. It should
be `sqrt(3)*0.5` to account for the maximum possible distance of mesh
elements inside a cell. Otherwise some cells that should form the
boundary are not detected as such (no closest mesh element found inside
the radius), so you get gaps in the smoke obstacle.
Current temporary data of Blender suffers one major issue - default 'temp' dir on Windows is never
automatically cleaned up, and can end being quite big when used by Blender, especially when we have
to store per-process data (using getpid() in file names).
To address this, this patch:
* Divides tempdir paths in two, one for 'base' temp dir (the same as previous unique tempdir path),
the other is a mkdtemp-generated sub-dir, specific to each Blender instance.
* Only uses base tempdir when we need some shallow persistance accross Blender sessions - and we always
reuse the same filename (quit.blend...) or generate small file (crash reports...).
* Uses temp sub-dir for heavy files like pointcache or renderEXRs (Save Buffer option).
* Erases temp sub-dir on quit or crash.
To get this working it also adds a working 'recursive delete' to BLI_delete() under Windows.
Note that, as in current code, the 'recover render result' hack-feature that was possible
with SaveBuffer option is still removed. A real renderresult cache feature will be added
soon, though.
Reviewers: campbellbarton, brecht, sergey
Reviewed By: campbellbarton, sergey
CC: sergey
Differential Revision: https://developer.blender.org/D531
Bastien Montagne