Added support for compositor tests. Compositor tests can be added, executed and viewed in a similar way to cycles
and other render engines tests.
Running test:
`ctest -R compositor`
Updating test:
`BLENDER_TEST_UPDATE=1 ctest -R compositor`
Viewing test results:
typically saved under `build_folder/tests/compositor/report.html`
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6334
The calculation of the 2D point was wrong when using orthographic mode.
Also small cleanup in float3 variable.
Differential Revision: https://developer.blender.org/D10828
SocketReader was added as an easier to understand interface on top of
the NodeOperation. It was implemented as a base class of the
NodeOperation and adds an additional hierarchy level.
Ths change replaces the abstract class with a typedef. In the end we
want to remove the typedef but will wait for some new nodes before doing
so.
Generalize threading settings in proxy building and use them for encoding
and decoding in general. Check codec capabilities, prefer FF_THREAD_FRAME
threading over FF_THREAD_SLICE and automatic thread count over setting it
explicitly.
ffmpeg-codecs man page suggests that threads option is global and used by
codecs, that supports this option. Form some tests I have done, it seems that
`av_dict_set_int(&codec_opts, "threads", BLI_system_thread_count(), 0)`
has same effect as
```
pCodecCtx->thread_count = BLI_system_thread_count();
pCodecCtx->thread_type = FF_THREAD_FRAME;
```
Looking at `ff_frame_thread_encoder_init()` code, these cases are not
equivalent. It is probably safer to leave threading setup on libavcodec than
setting up each codec threading individually.
From what I have read all over the internet, frame multithreading should be
faster than slice multithreading. Slice multithreading is mainly used for low
latency streaming.
When running Blender with --debug-ffmpeg it complains about
`pCodecCtx->thread_count = BLI_system_thread_count()` that using thread count
above 16 is not recommended. Using too many threads can negatively affect image
quality, but I am not sure if this is the case for decoding as well - see
https://streaminglearningcenter.com/blogs/ffmpeg-command-threads-how-it-affects-quality-and-performance.html
This is fine for proxies but may be undesirable for final renders.
Number of threads is limited by image size, because of size of motion vectors,
so if it is possible let libavcodec determine optimal thread count.
Performance difference:
Proxy building: None
Playback speed: 2x better on 1920x1080 sample h264 file
Scrubbing: Hard to quantify, but it's much more responsive
Rendering speed: None on 1920x1080 sample h264 file, there is improvement with codecs that do support FF_THREAD_FRAME for encoding like MPNG
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10791
Split seeking section of `ffmpeg_fetchibuf()` function into multiple
smaller functions.
Conditional statements are moved to own funtions with human readable
names, so code flow is more clear.
To remove one branch of seeking, first frame is now decoded by
scanning, which will do only one iteration. So nothing has technically
changed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10638
This adds a Clamp node for Geometry Nodes Attributes.
Supports both Min-Max and Range clamp modes.
Float, Vector, Color and Int data types supported.
Reviewed By: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10526
As a rather premature optimization from rBbbe6d4492823, Object bounds
were only computed when either the Object or its Geometry were modified.
Prior to rB42198e9eb03b, this would work, as the Geometry was tagged as
modified if the Object's transform was also modified.
Since this tagging is not done anymore due to side effects, and since at
the time bounds are computed Objects were already processed and tag as
unmodified, the check on the modified status was always false.
For now remove this check, so the bounds are always unconditionally
updated. If this ever becomes a performance problem in large scenes with
motion blur, we will then try to find a way to nicely optimize it.
This would only affect BHV2 as OptiX and Embree handle object bounds
themselves.
When an addon has been removed, but its `.pyc` files are still there,
the Python module can still be loaded. However, because `__init__.py` is
missing, it becomes a namespace instead of a module, and its `__file__`
will be set to `None`. As a result, it's impossible to get the mtime
from the file (because there is none).
This should not influence any regularly uninstalled add-on, as that
would just remove the add-on's directory; I ran into the problem when
switching Git branches caused an add-on's Python files to disappear
while keeping the `__pycache__` directory around.
When rendering with cycles at some point the manifest is trimmed. This
leads to incomplete/corrupted metadata. This patch will make sure that
the manifest parser doesn't crash.
This solved the issue when the manifest is trimmed at the start of a
hash. Eg '"Name":"'.
This commit adds a node with a "Map Range" operation for attributes
just like the non-attribute version of the node. However, unlike the
regular version of the node, it also supports operations on vectors.
Differential Revision: https://developer.blender.org/D10344
This adds a new RNA method `Action.flip_with_pose(ob)` to flip the
action channels that control a pose.
The rest-pose is used to properly flip the bones transformation.
This is useful as a way to flip actions used in pose libraries,
so the same action need not be included for each side.
Reviewed By: sybren
Ref D10781
Support a cache for fast RNA path look-ups for RNA-path + index.
Unlike a regular hash lookup, this supports using a single lookup
for the RNA path which is then used to fill an array of F-curves.
Reviewed By: sybren
Ref D10781
This function returns an array of keyed frames with rounding,
to avoid duplicates caused by subtle floating point difference.
Reviewed By: sybren
Ref D10781
The recent commit that changed the size (rB83df3545246aada) left out
a few changed. This patch also adjusts the positioning and UV scale of
the generated plane accordingly.
Differential Revision: https://developer.blender.org/D10822
Purely local IDs would not always be used as proper barriers when
generating override hierarchy data, leading to imporperly trying to
resync override IDs from other hierarchies, which would break/cause
issues in case they would be duplicate overrides of the same linked
data.
Reported by Pablo from Sprite team, thanks.
We do not want to re-generate auto-overrides until everything that
needed to be resynced has been resynced. Otherwise it's a waste of time
and guaranteed loss of some override properties.
Mistake in rB9947f2095610 earlier today.
This will allow retrieving the instance groups from multiple geometry
sets and avoiding needing vectors of vectors to store the results.
This is useful when retrieving instances from a multi-input socket
of geometries.
select
In 'Set/Replace' mode this is not a problem, but 'Extend' or 'Subtract'
modes were useless with the current behavior.
The problem here is that 'node.select' fires before 'node.select_box'
(which is fine) but deselects immediately on click.
This issue has come up before in other editors, see
{T70457}
{rB395dfff103e1}
{rBa8ea1ea1b7d5}
Now delay deselection in empty space to mouse release (same as done in
before mentioned report).
also related:
ref T57918
ref T63994
Maniphest Task: T86867
Differential Revision: https://developer.blender.org/D10801
Replacing a hard-coded font size with font style widget size so it can be set by user.
Differential Revision: https://developer.blender.org/D10819
Reviewed by Dalai Felinto
account
UV coords are scaled by aspects (see UVsToTransData). This also applies
for the Cursor in the UV Editor which also means that for display and
when the cursor coords are flushed (new 'recalcData_cursor_image' was
added for this), these need to be converted each time.
Maniphest Tasks: T86796
Differential Revision: https://developer.blender.org/D10817
This flags moving the cursor in the Image Editor T_2D_EDIT with the
following benefits:
- dissallowing e.g. Z constraints
- improving the header display:
-- it should not use scene units
-- now respects if we are moving in pixel coords or not
part of upcoming fix for T86796
ref D10817
When subscribing to name-changes through the API,
the event doesn't trigger if the object is renamed in the outliner.
Fixed by publishing the RNA changes.
Reviewed By: lichtwerk
Ref D10732
This was only happening without an active object.
The "Operator Cheat Sheet" operator collects info about all operators,
and as part of that executes the callbacks to create dynamic enums. The
callback to enumerate the geometry operators (introduced in
rB370d6e50252b) attribute domains depends on a context object. If this
isn't available, we just have to return `DummyRNA_NULL_items`.
Maniphest Tasks: T86921
Differential Revision: https://developer.blender.org/D10814
Revert "Point users to new location of "Show Group Colors" option",
commit rB6ed6741ee35930bf81fad9a5eb6bb17eea168725.
These deprecation hints were intended for one release only, and thus can
be removed now.
This patch renames two domains:
* `Polygon` -> `Face`
* `Corner` -> `Face Corner`
For the change from `polygon` to `face` I did a "deep rename" where I updated
all (most?) cases where we refere to the attribute domain in code as well.
The change from `corner` to `face corner` is only a ui change. I did not see
a real need to update all code the code for that. It does not seem to improve
the code, more on the contrary.
Ref T86818.
Differential Revision: https://developer.blender.org/D10803
CacheFile writing code would not write generic ID data (call for it has
been missing since the initial commit, rB61050f75b13e).
While potentially affecting other areas (mostly CustomProperties/IDProperties),
this was a critical failure for liboverrides. Also added some workaround
code to allow opening broken files (though the override of the CacheFile
data-block will be lost).
Habib Gahbiche